Apply engine oil to the stud bolt threads.
Install the stud bolts.
After installation, be sure to measure the distance from the top of each stud to the crankcase surface as shown.
Honda:
Cylinder stud bolt replacement (Honda VTX1800C)
If you will replace the stud bolts, remove them from the crankcase.
Apply engine oil to the stud bolt threads.
Install the stud bolts.
After installation, be sure to measure the distance from the top of each stud to the crankcase surface as shown.
Apply engine oil to the stud bolt threads.
Install the stud bolts.
After installation, be sure to measure the distance from the top of each stud to the crankcase surface as shown.
See this article in russian language
Similar articles about motorcycles of other brands
Suzuki DRZ 250 (1996-2007): Camshaft/Cylinder Head Inspection and Maintenance
Triumph Rocket III (2004-2018): Exploded view — cylinder head
Yamaha FZ1 Fazer (2006-2015): Removing the cylinder head
Kawasaki ZX6R/ZX600J (2000-2002): Cylinder head cover — removal
Harley-Davidson V-Rod (2002-2006): Cylinder leakage test
BMW R 1150 GS (1999-2004): Tightening cylinder heads
Ducati ST2 (1997-2003): Checking the cylinder compression
Aprilia RS 125/3 (1998-2005): Nut, bolt, screw tightening
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Control devices
- Operation manual
- Maintenance
- Engine and systems
- Engine repair
- Fuel and control system
- Cooling system
- Lube system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Front suspension and handlebar
- Rear suspension
- Brake system
- Electric equipment
- Equipment and devices
- Ignition system
- Starting and charging system