Motorcycle engine cooling system Triumph Tiger 800 XC (2010-2019)

Exploded View — Cooling System
Exploded View - Cooling System

Coolant and Radiator Hoses
A permanent type of anti-freeze is installed in the cooling system when the motorcycle leaves the factory. A year-round, Hybrid Organic Acid Technology (known as Hybrid OAT or HOAD coolant is installed in the cooling system. lt is coloured green,...

Radiator and Cooling Fan
Check the radiator fins for obstruction by insects, mud, leaves and general debris. Clean off any obstructions by hand or with a stream of low pressure water. Warning: The cooling fan operates automatically. To prevent injury, keep hands and...

Coolant Level Inspection
Warning: Do not remove the coolant pressure cap when the engine is hot. When the engine is hot, the coolant inside the radiator is hot and also under pressure. Contact with the pressurised coolant will cause scalds and skin damage. Note: Only...

Coolant Replacement
Drainage Note: Prior to disassembly of the coolant hoses, note the orientation and position of the hose clips to help ensure that they are returned to the same positions and orientation on assembly. Early models have a bleed screw fitted to the...

Coolant Pressure Cap and Coolant System Testing
Inspection and Testing Warning: Do not remove the coolant pressure cap when the engine is hot. When the engine is hot, the coolant inside the radiator is hot and also under pressure. Contact with the pressurised coolant will cause scalds and skin...

Removal, Inspection Installation and Thermostat
Removal Note: Prior to disassembly of the coolant hoses, note the orientation and position of the hose clips to help ensure that they are returned to the same positions and orientation on assembly. 1. Remove the rider's seat (see page 16-13 ). 2....

Removal, Inspection and Installation Radiator
Removal Note: Prior to disassembly of the coolant hoses, note the orientation and position of the hose clips to help ensure that they are returned to the same positions and orientation on assembly. 1. Remove the rider's seat (see page 16-13 ). 2....