Electrical equipment and instruments of motorcycle Triumph Tiger 800 (Tiger, 2010-2019)

Exploded View — Instruments
Exploded View - Instruments

Exploded View — Headlight
Exploded View - Headlight

Exploded View — Rear Light & Reflectors
Exploded View - Rear Light & Reflectors

Exploded View — Direction Indicators
Exploded View - Direction Indicators

Relays Identification
The relay pack is located beneath the rider's seat, adjacent to the fuse boxes. To gain access to the relays, remove the rider's seat (see page 16-13 ). Relay Identification 1. Cooling fan relay; 2. Engine management system (EMS) main relay; 3....

Fuse Identification
If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of the correct current rating. A blown fuse is indicated when all of the systems protected by that fuse become inoperative....

Instrument Pack — removal and installation
Removal 1. Remove the rider's seat (see page 16-13 ). 2. Disconnect the battery, negative (black) lead first. 3. Remove the windscreen (see page 16-19 ). 4. Remove the two fixings and remove the screen upper bracket. 1. Upper screen bracket; 2....

Adjustment Headlights
Headlight Adiustment Note: The headlight can be adjusted by means of vertical and horizontal adjustment screws located on the rear of the headlight. 1. Horizontal adjustment screw; 2. Vertical adjustment screw; 3. Headlight adjuster lever for loaded...

Headlight Assembly
Removal 1. Remove the rider's seat (see page 16-13 ). 2. Disconnect the battery, negative (black) lead first. 3. Remove the windscreen (see page 16-19 ). 4. Remove the cockpit assembly (see page 16-17 ). 5. Release the four fixings securing the...

Rear Light — removal and installation
Removal Note: The rear light is a sealed for life unit and must be replaced in the event of a failure. 1. Remove the seats (see page 16-13 ). 2. Disconnect the battery, negative (black) lead first. 3. Remove the rear mudguard (see page 16-22 ). 4....

Direction Indicators
Bulb Replacement 1. Direction indicator lens; 2. Screw The lens on each direction indicator is held in place by a securing screw located in the lens of the light. Release the screw and remove the lens to gain access to the bulb for replacement.

Rear Direction Indicator — removal and installation
Removal 1. Remove the seat (see page 16-13 ). 2. Disconnect the battery, negative (black) lead first. 3. Remove the rear rack (see page 16-20 ). 4. Release the fixing securing the direction indicator to the rear mudguard and detach the direction...

Front Direction Indicator — removal and installation
Removal 1. Remove the rider's seat (see page 16-13 ). 2. Disconnect the battery, negative (black) lead first. 3. Remove the upper radiator panel (see page 16-14 ). 4. Release the fixing securing the direction indicator to the upper radiator panel...