Engine Oil Circuit Description Oil is collected from the sump and is drawn through a mesh strainer into the oil pump rotor. The oil pump is fitted with a single pumping rotor which supplies pressurised oil to the lubrication circuit via the oil pressure relief valve. The relief...
Heat Exchanger The heat exchanger is used to transfer heat from the engine oil into the coolant. Oil is delivered to the heat exchanger via a hollow centre bolt, after which it flows around the end tank and into the heat exchanger core, where it is circulated....
Engine Oil Specification Use semi or fully synthetic 10W/40 or 15W/50 motorcycle engine oil which meets specification API SH (or higher) and JASO MA, such as Castrol Power 1 Racing 4T, sold as Castrol Power RS Racing 4T in some countries. Caution: Triumph high...
Oil Level Inspection In order for the engine, transmission, and clutch to function correctly, maintain the engine oil at the correct level, and change the oil and oil filter in accordance with scheduled maintenance requirements. Warning: Never start the engine or run...
Oil and Oil Filter Change Warning: Prolonged or repeated contact with engine oil can lead to skin dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contamination which can cause cancer. Wear suitable clothing and avoid skin...
Oil Pump — removal, installation, inspection and assembly Warning: Prolonged or repeated contact with engine oil can lead to skin dryness, irritation and dermatitis. Furthermore, used engine oil contains potentially harmful contaminants which can cause cancer. When handling used engine .oil, always wear...
Low Oil Pressure Warning Light Switch — removal and installation The low oil pressure warning light switch is located in the upper crankcase, behind the cylinder head. Removal 1. Low oil pressure warning light switch; 2. Electrical connection 1. Remove the rider's seat (see page 16-13 ). 2. Disconnect the...
Removal and Installation Sump Removal 1. Remove the rider's seat (see page 16-13 ). 2. Disconnect the battery, negative (black) lead first. 3. Drain the engine oil (see page 8-7 ). Warning: The oil may be hot to the touch. Contact with hot oil may cause the skin to be scalded or...
Removal, Installation and Inspection Heat Exchanger Removal Note: Prior to disassembly of the coolant hoses, note the orientation and position of the hose clips to help ensure that they are returned to the same positions and orientation on assembly. 1. Position the motorcycle on level ground on the...