- Timing chain tensioner housing «1»
- Timing chain tensioner rod «2»
- Timing chain tensioner spring «3»
Note: Squeeze the timing chain tensioner clip, and then remove the timing chain tensioner spring and timing chain tensioner rod.
2. Check:
- Timing chain tensioner housing
- Timing chain tensioner rod
- Timing chain tensioner spring. Damage/wear → Replace.
3. Install:
- Timing chain tensioner spring
- Timing chain tensioner rod «1»
Note: Prior to installing the timing chain tensioner rod, drain the engine oil from the timing chain tensioner housing.
a. Install the timing chain tensioner spring and timing chain tensioner rod «1».
b. Squeeze the timing chain tensioner clip «2» and push the timing chain tensioner rod «3».
Note: When the timing chain tensioner rod «3» is pushed while holding the grip of the timing chain tensioner clip «2», make sure not to release the timing chain tensioner rod «3» before releasing the timing chain tensioner clip «2». (Otherwise, the timing chain tensioner rod «3» may run off.)
c. Hook the clip «4» to the timing chain tensioner rod «3».
Note: Hook the timing chain tensioner rod pin «5» to the center of the clip «4». After the installation, check that the clip «4» can come off by its own weight by pushing the timing chain tensioner rod «3» at the position of installation.
