- Right front engine mounting bolt 2 «1». Refer to «Cylinder head».
2. Tighten:
- Right front engine mounting bolt 2
Right front engine mounting bolt 2: 50 Nm (5.0 m·kg, 36 ft·lb).
3. Install:
- Engine mounting adjust bolts (temporarily tighten)
4. Install:
- Engine
5. Install:
- Lower engine mounting bolt «1»
- Upper engine mounting bolt «2»
- Self-locking nuts
Note: Do not fully tighten the bolts and nuts.
6. Install:
- Left front engine mounting bolt «1» (temporarily tighten)
- Right front engine mounting bolt 1 «2» (temporarily tighten)
7. Tighten:
- Engine mounting adjust bolts
Engine mounting adjust bolt: 7 Nm (0.7 m·kg, 5.1 ft·lb)
Note: Use the pivot shaft wrench «1» and pivot shaft wrench adapter «2» to tighten the engine mounting adjust bolts.
Pivot shaft wrench: 90890-01518
Frame spanner socket: YM-01518
Pivot shaft wrench adapter: 90890-01476
8. Tighten:
- Lower self-locking nut «1»
- Upper self-locking nut «2»
Upper self-locking nut: 51 Nm (5.1 m·kg, 37 ft·lb).
Lower self-locking nut: 51 Nm (5.1 m·kg, 37 ft·lb).
Note: First tighten the lower self-locking nut, and then tighten the upper self-locking nut.
9. Tighten:
- Left front engine mounting bolt «1»
- Right front engine mounting bolt 1 «2»
Left front engine mounting bolt: 45 Nm (4.5 m·kg, 33 ft·lb).
Right front engine mounting bolt 1: 45 Nm (4.5 m·kg, 33 ft·lb).
