Installing the balancer assembly (Yamaha YZF-R1 Y(C))

0

1. Install:

• Balancer journal upper bearings (into the upper crankcase)
• Balancer journal lower bearings (into the lower crankcase)
• Align the projections "a" on the balancer journal bearings "1" with the notches "b" in the crankcases.
• Be sure to install each balancer journal bearing in its original place.

2. Install:

• Balancer shaft

Install by aligning the crankshaft match mark "a" and the balancer shaft match mark "b".

See this article in russian language

Article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014): «Installing the balancer assembly»: https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/repair/115516 <a href="https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/repair/115516">Installing the balancer assembly</a> - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Engine repair». [url=https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/repair/115516]Installing the balancer assembly[/url] - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Engine repair».