Removing clutch (Yamaha YZF-R1 Y(C))

0

1. Remove:

• Pull lever cover "1"
• Clutch cover "2"
• Gasket

Loosen each bolt 1/4 of a turn at a time, in stages and in a crisscross pattern.

After all of the bolts are fully loosened, remove them.



2. Remove:

• Compression spring bolts "1"
• Compression springs
• Pressure plate 1 "2"
• Pull rod "3"

3. Remove:

• Friction plate 1 "1"

4. Remove:

• Clutch plate 1 "1"
• Friction plate 2
• Clutch plate 2
• Clutch plate 3

5. Straighten the clutch boss nut rib "a".



6. Loosen:

• Clutch boss nut "1"

While holding the clutch boss "2" with the universal clutch holder "3", loosen the clutch boss nut.

Universal clutch holder 90890-04086 YM-91042.



7. Remove:

• Clutch boss nut
• Springs
• Clutch boss
• Pressure plate 2
• Conical spring washer
• Thrust washer
• Clutch housing assembly

See this article in russian language

Article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014): «Removing clutch»: https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/transm/115484 <a href="https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/transm/115484">Removing clutch</a> - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Transmission». [url=https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/transm/115484]Removing clutch[/url] - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Transmission».