- Drive axle assembly "1"
- Shift drum retainers "2"
- Shift fork guide bars
- Shift fork "L" and "R"
- Shift drum assembly
- Shift fork "C"
2. Remove:
- Main axle assembly "1"
a. Insert two bolts "2" of the proper size, as shown in the illustration, into the main axle assembly bearing housing.
b. Tighten the bolts until they contact the crankcase surface.
c. Continue tightening the bolts until the main axle assembly comes free from the upper crankcase.
3. Remove:
- Oil delivery pipe 2 "1"
- Bearings "2"
