Installing the shift shaft (Yamaha YZF-R1 Y(C))

0

1. Install:

• Shift shaft spring stopper "1"
• Shift shaft assembly
• Stopper lever spring "2"

Shift shaft spring stopper 22 Nm (2.2 m·kgf, 16 ft·lbf) LOCTITE®.

• Lubricate the oil seal lips with lithium-soapbased grease.
• Hook the end of the shift shaft spring "3" onto the shift shaft spring stopper "1".
• Hook the ends of the stopper lever spring "2" onto the stopper lever "4" and the crankcase boss "5".
• Mesh the stopper lever with the shift drum segment assembly.

See this article in russian language

Article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014): «Installing the shift shaft»: https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/transm/115498 <a href="https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/transm/115498">Installing the shift shaft</a> - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Transmission». [url=https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/engine/transm/115498]Installing the shift shaft[/url] - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Transmission».