- Toothed washer "1"
- Circlip "2" New
- Be sure the circlip sharp-edged corner "a" is positioned opposite side to the toothed washer and gear.
- Align the opening between the ends "b" of the circlip with a projection "c" of the spline in the axle.
![](https://motoinstruction.ru/img/yamaha/20/126806.jpg)
2. Install:
- Toothed lock washer retainer "1"
- Toothed lock washer "2"
- With the toothed lock washer retainer "1" in the groove "a" in the axle, align the projection "c" on the retainer with an axle spline "b", and then install the toothed lock washer "2".
- Be sure to align the projection on the toothed lock washer that is between the alignment marks "e" with the alignment mark "d" on the retainer.
![](https://motoinstruction.ru/img/yamaha/20/126807.jpg)