- Place the vehicle on a suitable stand.
- Make sure the vehicle is upright.
2. Check:
- Coolant level
The coolant level should be between the maximum level mark "a" and minimum level mark "b".
Below the minimum level mark → Add the recommended coolant to the proper level.
![](https://motoinstruction.ru/img/yamaha/20/126360.jpg)
Notice:
- Adding water instead of coolant lowers the antifreeze content of the coolant. If water is used instead of coolant check, and if necessary, correct the antifreeze concentration of the coolant.
- Use only distilled water. However, if distilled water is not available, soft water may be used.
3. Start the engine, warm it up for several minutes, and then turn it off.
4. Check:
- Coolant level
Before checking the coolant level, wait a few minutes until it settles.