Place the vehicle on a suitable stand.
Make sure the vehicle is upright.
2. Start the engine, warm it up for several minutes, and then turn it off.
3. Check:
- Engine oil level
The engine oil level should be between the minimum level mark "a" and maximum level mark "b".
Below the minimum level mark → Add the recommended engine oil to the proper level.
![](https://motoinstruction.ru/img/yamaha/20/126350.jpg)
Type YAMALUBE 4 10W-40 or YAMALUBE 4 20W-50, SAE 10W-40 or SAE 20W-50.
Recommended engine oil grade API service SG type or higher, JASO standard MA.
![](https://motoinstruction.ru/img/yamaha/20/126351.jpg)
Notice: Engine oil also lubricates the clutch and the wrong oil types or additives could cause clutch slippage. Therefore, do not add any chemical additives or use engine oils with a grade of CD "a" or higher and do not use oils labeled "ENERGY CONSERVING II" "b".
Do not allow foreign materials to enter the crankcase.
![](https://motoinstruction.ru/img/yamaha/20/126352.jpg)
4. Start the engine, warm it up for several minutes, and then turn it off.
5. Check the engine oil level again.
Before checking the engine oil level, wait a few minutes until the oil has settled.