Caution!
- Switch off ignition.
- Disconnect earth (ground) lead from battery.
- Insulate earth (ground) lead.
Remove cover (1) from ABS control unit, press the lock in with a screwdriver and pull the cover up.
Scrap the old cover (1).
Disconnect lines (2) and discard nuts.
Caution! Make sure the cable is not at an angle, or its insulation may be damaged.
Pull off 2-pin plug (3).
Remove relay socket (4).
Back off screws on relay socket by app. 2 turns with Torx T20.
Pull the relay up to remove.