Removing and installing footbrake lever (BMW R1150GS)

0

Release the pin in the brake linkage.

Remove fasteners securing footbrake lever.

Remove footbrake lever with torsion spring.

Installation is the reverse of the removal procedure.

Lubricate pivot bushing with Shell Retinax A.

Caution!

• Check/adjust piston rod play.
• See removal and installation of brake master cylinder.
• The brake light must come on as soon as the rear brake begins to take effect.

Tightening torque: Footbrake lever to footrest plate — 21 Nm

See this article in russian language

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Removing and installing footbrake lever»: https://motoinstruction.ru/en/BMW/R/R1150GS/chassis/brake/111744 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/chassis/brake/111744">Removing and installing footbrake lever</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Brake system». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/chassis/brake/111744]Removing and installing footbrake lever[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Brake system».