Removing and installing front brake line
![](https://motoinstruction.ru/img/bmw/6/114060.jpg)
Removing and installing rear brake line
![](https://motoinstruction.ru/img/bmw/6/114061.jpg)
Caution! Do not allow brake fluid to come into contact with painted parts of the motorcycle as brake fluid destroys paint.
Drain the brake system.
[ABS] Remove the fuel tank.
Remove brake lines.
Installation is the reverse of the removal procedure.
Caution!
- Remove sealing rings for brake line.
- Secure brake line to master cylinder in such a way that it cannot kink or chaff when the handlebar is turned.
Fill and bleed the brake system.
Tightening torque:
- Brake line to handlebar fitting — 18 Nm
- Brake line to front/rear brake caliper — 18 Nm
- Brake hose to bracket — 9 Nm
- Bleed screw in rear brake caliper — 6 Nm
- Bleed screw in front brake caliper — 14 Nm
- Bleed screw on ABS unit — 14 Nm
- Bracket to front frame — 9 Nm
- Bracket to rear frame — (clean thread + Loctite 2701) — 9 Nm
- Bracket to slider tube bridge (clean thread + Loctite 2701) — 5 Nm
- Brake line to ABS unit — 18 Nm