Disassembly cam shaft and lower rocker arms (Ducati ST2)

0

Pull out the cam shaft. Do not damage or lose the shims.



Hook the end part of the closing rocker arm spring to service tool 88713.0143.



Remove the closing rocker arm pins using service tool 88713.0120.



Pull out the rocker arms. Do not damage or lose the shims placed between the rocker arm and its seat. О Pull out the oil seal grommet on the valve guide.

See this article in russian language

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «Disassembly cam shaft and lower rocker arms»: https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112133 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112133">Disassembly cam shaft and lower rocker arms</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Engine repair». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/engine/repair/112133]Disassembly cam shaft and lower rocker arms[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Engine repair».