Table 5-1. Sprocket teeth
| DRIVE | ITEM | NUMBER OF TEETH | ||||
| XL 883 MODELS | XL 1200 MODELS | XR1200X | ||||
| U.S. | WORLD | U.S. | WORLD | U.S./WORLD | ||
| Primary | Engine | 34 | 34 | 38 | 38 | 34 |
| Clutch | 57 | 57 | 57 | 57 | 57 | |
| Final | Transmission | 29 | 29 | 29 | 30 | 28 |
| Rear wheel | 68 | 68 | 68 | 68 | 68 | |
Table 5-2. Overall drive ratios
| GEAR | XL 883 MODELS | XL 1200 MODELS | XR 1200X | |
| ALL | U.S. | WORLD | U.S./WORLD | |
| 1st | 10.407 | 9.315 | 9.004 | 10.782 |
| 2nd | 7.436 | 6.653 | 6.432 | 7.702 |
| 3rd | 5.530 | 4.948 | 4.783 | 5.728 |
| 4th | 4.583 | 4.102 | 3.965 | 4.748 |
| 5th | 3.931 | 3.517 | 3.400 | 4.071 |
Note. Service wear limits are given as a guideline for measuring components that are not new. For measurement specifications not given under SERVICE WEAR LIMITS, see NEW COMPONENTS.
Table 5-3. Clutch pack plate specifications
| ITEM | NEW COMPONENTS | SERVICE WEAR LIMIT | ||
| in | mm | in | mm | |
| CLUTCH PLATE THICKNESS | ||||
| Friction plate (fiber) | 0.8661±0.0031 | 2.2000±0.0800 | 0.0795 | 2.0200 |
| Steel plate | 0.0629 | 1.6000 | N/A | N/A |
| MAXIMUM ALLOWABLE WARPAGE | ||||
| Friction plate (fiber) | N/A | N/A | 0.0059 | 0.1500 |
| Steel plate | N/A | N/A | 0.0059 | 0.1500 |