Checking oil pressure (Harley V-Rod VRSCA)

0

PART NO.	SPECIALTY TOOL
HD-45308	Oil pressure gauge
HD-45309	Oil pressure gauge adapter

Operating oil pressure is checked as follows:

1. Fill crankcase to proper level.

2. Remove oil pressure switch from crankcase.

3. Attach OIL PRESSURE GAUGE (1) (HD-45308) to ADAPTER (2) (HD-45309).

Figure 3-5. Oil pressure gauge (HD-45308)

Figure 3-6. Oil pressure gauge adapter (HD-45309)

4. Install in oil pressure switch mounting hole.

Note. Engine oil should be at normal operating temperature 70°C (158°F) for an accurate reading.

5. Oil pressure should be 3-6.5 bar (43-94 psi) at 3000 rpm and normal operating temperature of 70°C (158°F).

See this article in russian language

Article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006): «Checking oil pressure»: https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/cooling/110490 <a href="https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/cooling/110490">Checking oil pressure</a> - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Cooling and lube system». [url=https://motoinstruction.ru/en/Harley/V-Rod/VRSCA/engine/cooling/110490]Checking oil pressure[/url] - article about repair motorcycles «Harley V-Rod VRSCA» (2002-2006) from section «Cooling and lube system».