AMP multilock electrical connectors Removing socket/pin terminals 1. Remove connector from the retaining device, either attachment or rosebud clip. 2. Depress the button on the socket terminal side of the connector (plug) and pull apart the pin and socket halves. 3. Bend back the...
Deutsch electrical connectors General Deutsch Connectors feature a superior seal to protect electrical contacts from dirt and moisture in harsh environments. The connector also provides superior pin retention. See Figure B-8. This 12-pin connector illustrates the various parts...
Sealed butt splice connectors — installation Installation Butt splicing may be a necessary procedure for the replacement of some components. 1. Strip 3/8 in. (9.5 mm) of insulation off the ends of the wires. 2. Compress the handles of the Packard Crimp Tool (HD-38125-8) until the ratchet...
Packard electrical connectors General From a servicing standpoint, there are two basic types of Packard electrical connectors, those with pull-to-seat terminals and those with push-to-seat terminals. Look into the mating end of the connector. If it appears that the terminal can...
Packard ECM connector — disassembly and assembly Disassembly 1. See Figure B-23. Depress tabs (3) on the sides of connector and remove clear plastic cover (4). Figure B-23. ECM connector: 1. Conduit; 2. Cable strap; 3. Tabs; 4. Clear plastic cover 2. Remove cable strap (2). 3. See Figure B-24. Pry...