Keys, alarm & security of motorcycle Harley V-Rod VRSCA (2002-2006)

Harley-Davidson Intelligent Safety System
System components See Figure 14. H-DSSS Intelligent Security System (Harley-Davidson Smart Security System) consists of an automatic safety system module HFSM (Hands-Free Security Module) (1) and antennas for wireless communication (2), mounted on a...

Compliance with the standards of the US Federal Communications Commission (FCC)
IDENTIFIER (ID) FCC: L2C0027TR IC ID: 3432A-0027TR IDENTIFIER (ID) FCC: L2C0028TR IC ID: 3432A-0028TR This device complies with Part 15 of the FCC Rules and Industry Canada regulations. RSS-210. Operation is permitted subject to the following two...

Wireless control key fob
Assigning a wireless remote control to a system See Figure 15. Wireless control keys are electronically assigned by your Harley-Davidson dealer to the Intelligent Security System so that the system module recognizes the unique signal transmitted by...

Personal identification number (PIN)
The Personal Identification Number (PIN) is a number that can be used to disable the Harley-Davidson Intelligent Security System if the assigned key fob is lost, fails, or if the fob and module are unable to communicate with each other due to...

Security status indicator
See Figure 17. The illuminated key icon on the speedometer indicates the status of the Harley-Davidson Intelligent Safety System. Figure 17. Security status indicator Enabled: The key icon flashes approximately once every 3 seconds. This means the...

Turning the security system on and off
Inclusion When the motorcycle is parked and the ignition key is turned to the OFF position, the Harley-Davidson Intelligent Security System automatically turns on after 5 seconds if no movement is detected. The system will turn on even if the...

Motorcycle alarm
Warnings As soon as the security system is turned on - if the motorcycle starts to move, or is removed from the stand, or the ignition key is turned to the IGNITION position and the key fob is not in the system's range of vision - an alert will be...

Operation mode with siren signal (confirmation)
Operating mode without siren signal In operating mode without a siren signal, the siren does not sound a sound signal, either when the security system is on or when it is off. Note. When the security system is enabled, even if the siren is in silent...

Transport mode
It is possible to enable the security system so that the motorcycle motion detector is not activated for one ignition cycle. This allows you to remove the motorcycle from the stand and start driving with the security system on, but if you try to...

Storing the motorcycle and keeping it at the dealer's service center
Long-term parking To ensure that the alarm stays on at all times, store the key fob outside the range of the security system module. If you need to move a parked motorcycle, take the key fob with you. If the motorcycle will not be used for several...

Replacing the key fob battery
The key fob battery needs to be replaced once a year. 1. See Figure 19. Using a thin, flat object, slowly turn the slot «for thumb nail» (1), which is located on the side of the keychain - after this the keychain can be separated into two halves....

Power outage
Siren (delivery option) When the power supply is turned off, to prevent the siren module from turning on: 1. Make sure the key fob is located near the motorcycle. 2. Turn the ignition key to the IGNITION position. 3. Remove the maxi-fuse fuse from...

Troubleshooting
Key icon If the key icon remains illuminated while driving, contact your Harley-Davidson dealer. Keychain When the key fob is near the motorcycle - if the intelligent security system continues to sound warning lights and alarms, the reason for this...