Threaded connections — check (Honda CB400SF/1)

0

As part of the regular technical inspection of the motorcycle, special attention should be paid to checking the tightness of the screw connections. There are a lot of vibration-loaded components in a motorcycle, such as an engine, front and rear suspensions, etc.

First of all, it is necessary to inspect the fastenings of critical components: the front and rear elements of the engine mounting to the frame, the fastening of the rear suspension pendulum, the fastening of the front fork in the yokes.

It is necessary to check the tightness of the wheel axle nuts, the fastening of the brake calipers and brake discs. Tightening of critical connections must be done to a regulated torque.

It is also recommended that you regularly tighten all accessible screw connections to avoid losing parts of the motorcycle while riding.

See this article in russian language

Article about repair motorcycles «Honda CB series CB400SF» (1992-1999): «Threaded connections — check»: https://motoinstruction.ru/en/Honda/CB/CB400SF-1/owner/service/110233 <a href="https://motoinstruction.ru/en/Honda/CB/CB400SF-1/owner/service/110233">Threaded connections — check</a> - article about repair motorcycles «Honda CB series CB400SF» (1992-1999) from section «Maintenance». [url=https://motoinstruction.ru/en/Honda/CB/CB400SF-1/owner/service/110233]Threaded connections — check[/url] - article about repair motorcycles «Honda CB series CB400SF» (1992-1999) from section «Maintenance».