| application | threading (mm) | Nm±5% tolerance | note |
| Head nuts (final torque) | 10x1.5 | 38.5 | (1) GREASE C |
| Connecting rod screws (final torque) | 10x1 | 66.5 | (2) GREASE C |
| Crankshaft gear nut | 22x1 | 140 | |
| Alternator rotor nut | 20x1 | 181.5 | LOCK 8 |
| Gear lever retaining screws | 8x1.25 | 11 | |
| Clutch drum nut | 20x1 | 181.5 | |
| Timing shaft gear nut | 14x1 | 42 | |
| Timing pulley ring nut on drive | 15x1 | 61.5 | |
| Timing pulley ring nut on head | 15x1 | 71.5 | |
| Mobile tensioner pin | 8x1.25 | 26 | |
| Spark plug | 12x1.25 | 24.5 | |
| Gear drum positioning screw | 16x1.5 | 32 | |
| Clutch housing screw | 8x1 | 32 | LOCK 4 |
| Cam shaft support screws | 6x1 | 11 | |
| Alternator and ignition cableway ring nut | 22x1.5 | 42 | |
| Fixed tensioner pin | 8x1.25 | 26 | |
| Flywheel flange screws | 6x1 | 13.5 | LOCK 8 |
| Valve cover screws | 6x1 | 11 | |
| Casing connection screws | 8x1.25 | 24.5 | (3) GREASE B |
| Casing connection screws | 6x1 | 11 | |
| Gearbox bearing plate screws | 6x1 | 9 | LOCK 1 |
| Water pump bearing screws | 6x1 | 9 | LOCK 1 |
| By-pass plug | 18x1.5 | 42 | LOCK 2 |
| Cylinder head stud bolts | 10x1.5 | LOCK 2 | |
| Intake and exhaust flange stud bolts | 8x1.25 | LOCK 2 | |
| Mesh filter oilway plug | 12x1 | 23.5 | LOCK 5 |
| Oil pump oilway plug | 10x1.5 | 9 | LOCK 5 |
| Water pump delivery port | 22x1.5 | 23.5 | LOCK 5 |
| Oil filter nipple | 16x1.5 | 42 | LOCK 1 |
| Oil drain plug | 22x1.5 | 42 | |
| Idle warning light switch | 8x1 | 6 | |
| Mesh oil filter | 22x1.5 | 42 | |
| Cartridge oil filter | 16x1.5 | 17.5 | |
| Water intake port | 30x1.5 | 23.5 | LOCK 5 |
| Breather cap | 40x1.5 | 42 | |
| Radiator hose closing plug | 14x1.5 | 42 | |
| Alternator stator screws | 6x1 | 9 | LOCK 1 |
| Intake and exhaust manifold nuts | 8x1.25 | 23.5 | |
| Starter idling gear pin screws | 6x1 | 9 | LOCK 2 |
| Filler | 12x1 | 23.5 | LOCK 5 |
| Oil pump body screws | 8x1.25 | 23.5 | |
| Oil pump body and cover screws | 6x1 | 9 | |
| Ignition sensor screws | 5x0.8 | 5 | |
| Pressure switch | 10x1 | 19 | |
| Alternator cover screws | 6x1 | 9 | |
| Screws for water connection to cylinder and head | 6x1 | 9 | |
| Clutch cover screws | 6x1 | 9 | |
| Starter motor screws | 6x1 | 9 | LOCK 2 |
| Water temperature warning light switch | 10x1 | 23.5 |
(1) Preliminary torque: first 15 Nm, then 30 Nm.
(2) Preliminary torque: first 19.5 Nm, then 34.5 Nm.
(3) Preliminary torque: 18.5 Nm.
Note. For the symbols and specifications of the products used, see "Product Specifications " in the "Description" section.