Adjust the position of the brake foot by turning the rod (2), until the presser foot is 5 mm (A) below the driver's footrest.
Tighten the locking nut (1).
Brake foot position: 5 mm.
Suzuki:
Brake foot position (Suzuki DR-Z 250)
Loosen the locking nut (1).
Adjust the position of the brake foot by turning the rod (2), until the presser foot is 5 mm (A) below the driver's footrest.
Tighten the locking nut (1).
Brake foot position: 5 mm.
Adjust the position of the brake foot by turning the rod (2), until the presser foot is 5 mm (A) below the driver's footrest.
Tighten the locking nut (1).
Brake foot position: 5 mm.
See this article in russian language
Similar articles about motorcycles of other brands
Kawasaki ZX6R/ZX600J (2000-2002): Brake pedal position — inspection
Honda CB 400 SF (1992-1999): Rear position lamp and brake signal — removal and installation
Ducati ST2 (1997-2003): Adjusting the position of the gear change and rear brake pedals
BMW K 1200 LT (1998-2009): Replacing and adjusting foot brake light switch
Triumph Rocket III (2004-2018): Brakes and brake fluid — precautions
Yamaha FZ1 Fazer (2006-2015): Brake lever
Harley-Davidson V-Rod (2002-2006): Brake system
Aprilia RS 125/3 (1998-2005): Checking and topping up the front brake fluid level
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Technical characteristics
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Wheels and tires
- Brake system
- Front suspension and handlebar
- Rear suspension
- Electric equipment
- Equipment and devices
- Starting and charging system