STV synchronization (Suzuki DL650 V-Strom)

0

Install the throttle body. (5-27)

Turn the ignition switch OFF, if STV synchronization is performed on the vehicle.

Turn the STVA shaft with a finger so that the throttle valve height (A) will be same as (B).

Caution! Do not use the tool for turning the STVA shaft to prevent breakdown.

Note: Measure the throttle valve height (A), (B) from top of the throttle body (1) to the throttle valve (2).

While holding above No.1 STV position, turn the adjust screw (3) so that the throttle valve height (C) will be same as (D).

See this article in russian language

Article about repair motorcycles «Suzuki V-Strom DL 650» (2004-2011): «STV synchronization»: https://motoinstruction.ru/en/Suzuki/V-Strom/DL650-1/engine/fuel/113608 <a href="https://motoinstruction.ru/en/Suzuki/V-Strom/DL650-1/engine/fuel/113608">STV synchronization</a> - article about repair motorcycles «Suzuki V-Strom DL 650» (2004-2011) from section «Fuel system». [url=https://motoinstruction.ru/en/Suzuki/V-Strom/DL650-1/engine/fuel/113608]STV synchronization[/url] - article about repair motorcycles «Suzuki V-Strom DL 650» (2004-2011) from section «Fuel system».