Air cleaner box
Remove the fuel tank. (5-7)
Disconnect the IAT sensor coupler (1).
Remove the IAP sensor vacuum hose (2).
Disconnect the IAP sensor coupler (3).
![](https://motoinstruction.ru/img/suzuki/14/120367.jpg)
Loosen the throttle body clamp screws.
![](https://motoinstruction.ru/img/suzuki/14/120368.jpg)
![](https://motoinstruction.ru/img/suzuki/14/120369.jpg)
Disconnect the PAIR hose.
Disconnect the PAIR lead wire coupler (4).
![](https://motoinstruction.ru/img/suzuki/14/120370.jpg)
Disconnect the crankcase breather hoses.
Remove the air cleaner box.
![](https://motoinstruction.ru/img/suzuki/14/120371.jpg)
Throttle body
Remove the fuel tank. (5-7)
Remove the air cleaner box.
Disconnect the various lead wire couplers.
![](https://motoinstruction.ru/img/suzuki/14/120372.jpg)
1. TP sensor; 2. STP sensor; 3. STVA motor
Remove the injector lead wire coupler.
![](https://motoinstruction.ru/img/suzuki/14/120373.jpg)
Disconnect the idle stop screw.
![](https://motoinstruction.ru/img/suzuki/14/120374.jpg)
Loosen the throttle body clamp screws.
![](https://motoinstruction.ru/img/suzuki/14/120375.jpg)
![](https://motoinstruction.ru/img/suzuki/14/120376.jpg)
Disconnect the throttle cables from their drum.
Dismount the throttle body assembly.
![](https://motoinstruction.ru/img/suzuki/14/120377.jpg)
Caution!
- Be careful not to damage the throttle cable bracket and fast idle lever when dismounting or remounting the throttle body assembly.
- After disconnecting the throttle cables, do not snap the throttle valve from full open to full close. It may cause damage to the throttle valve and throttle body.