TP sensor adjustment (Suzuki DL650 V-Strom)

0

After checking or adjusting the throttle valve synchronization, adjust the TP sensor positioning as follows:

After warming up engine, adjust the idling speed to 1300 rpm.

Stop the warmed-up engine and connect the special tool to the dealer mode coupler. (5-20)

• 09930-82720: Mode select switch

If the TP sensor adjustment is necessary, loosen the TP sensor mounting screws.

Turn the TP sensor and bring the line to middle.

Tighten the TP sensor mounting screws.

• 09930-11950: Torx wrench
• TP sensor mounting screw: 3.5 N·m (0.35 kgf·m, 2.5 lb·ft)

See this article in russian language

Article about repair motorcycles «Suzuki V-Strom DL 650» (2004-2011): «TP sensor adjustment»: https://motoinstruction.ru/en/Suzuki/V-Strom/DL650-1/engine/fuel/113611 <a href="https://motoinstruction.ru/en/Suzuki/V-Strom/DL650-1/engine/fuel/113611">TP sensor adjustment</a> - article about repair motorcycles «Suzuki V-Strom DL 650» (2004-2011) from section «Fuel system». [url=https://motoinstruction.ru/en/Suzuki/V-Strom/DL650-1/engine/fuel/113611]TP sensor adjustment[/url] - article about repair motorcycles «Suzuki V-Strom DL 650» (2004-2011) from section «Fuel system».