Открыть большую картинку в новой вкладке »
(4) Main switch; (5) Alarm system (option); (6) Ignition fuse; (7) Battery; (8) Main fuse; (9) Starter relay; (10) Starter motor; (13) Starting circuit cut off relay; (20) Neutral switch; (29) Sidestand switch; (36) Clutch switch; (37) Start switch; (38) Engine stop switch; (60) Diode
Starting circuit operation
(1) Battery; (2) Main fuse; (3) Main switch; (4) Ignition fuse; (5) Engine stop switch; (6) Starting circuit cut-off relay; (7) Diode; (8) Clutch switch; (9) Sidestand switch; (10) Neutral switch; (11) Start switch; (12) Starter relay; (13) Starter motor
The starting circuit on this model consists of the starter motor, starter relay, and the starting circuit cut-off relay. If the engine stop switch is on "RUN" and the main switch is on "ON" (both switches are closed), the starter motor can operate only if:
The transmission is in neutral (the neutral switch is closed).
or if
The clutch lever is pulled to the handlebar (the clutch switch is closed) and the sidestand is up (the sidestand switch is closed).
or if
The clutch lever is pulled to the handlebar (the clutch switch is closed) and the sidestand is up (the sidestand switch is closed).
The starting circuit cut-off relay prevents the starter from operating when neither of these conditions have been met. In this instance, the starting circuit cut-off relay is open so current cannot reach the starter motor.
When at least one of the above conditions have been met however, the starting circuit cut-off relay is closed, and the engine can be started by pressing the starter switch.
When the transmission is in neutral
When the sidestand is up and the clutch lever is pulled in