Check:
- 1. main and headlight fuses
- 2. battery
- 3. main switch
- 4. lights switch (for Europe)
- 5. dimmer switch
- 6. pass switch
- 7. wiring (of the entire charging system)
Note: Before troubleshooting, remove the following part(-s).
- 1) battery cover
- 2) rider's seat
- 3) fuel tank
- 4) steering head side covers
- 5) headlight lens unit
- 6) tool box cover
- Troubleshoot with the following special tool(-s).
- Pocket tester: 90890-03112
1. Main, and headlight fuses
Check the main, and headlight fuses for continuity. Refer to "Checking the fuses".
Are the main, and headlight fuses OK?
NO: Replace the fuse(-s).
YES:
2. Battery
Check the condition of the battery. Refer to "Checking and charging the battery".
- Open-circuit voltage: 12.8 V or more at 20°C
Is the battery OK?
NO: Clean the battery terminals. Recharge or replace the battery.
YES:
3. Main switch
Check the main switch for continuity. Refer to "Checking the switches".
Is the main switch OK?
NO: Replace the main switch.
YES:
4. Lights switch (for Europe)
Check the lights switch for continuity. Refer to "Checking the switches".
Is the lights switch OK?
NO: The lights switch is faulty. Replace the right handlebar switch.
YES:
5. Dimmer switch
Check the dimmer switch for continuity. Refer to "Checking the switches".
Is the dimmer switch OK?
NO: The dimmer switch is faulty. Replace the left handlebar switch.
YES:
6. Pass switch
Check the pass switch for continuity. Refer to "Checking the switches".
Is the pass switch OK?
NO: The pass switch is faulty. Replace the left handlebar switch.
YES:
7. Wiring
Check the entire lighting system's wiring. Refer to "Circuit diagram".
Is the lighting system's wiring properly connected and without defects?
NO: Properly connect or repair the lighting system's wiring.
YES: Check the condition of each of the lighting system's circuits. Refer to "Checking the lighting system".