| Order | Job/Parts to remove | Quantity | Remarks |
| Rider and passenger seat | Refer to «General chassis». | ||
| Side cover (left and right) | Refer to «General chassis». | ||
| Brake fluid reservoir tank bolt | Refer to «Rear brake». | ||
| 1 | Self-locking nut/bolt | 1/1 | |
| 2 | Self-locking nut/bolt | 1/1 | |
| 3 | Self-locking nut/bolt | 1/1 | |
| 4 | Self-locking nut/bolt/collar | 1/1/1 | |
| 5 | Rear shock absorber assembly | 1 | |
| 6 | Oil seal/bearing/collar | 6/3/3 | |
| 7 | Collar/self-locking nut/bolt | 1/1/1 | |
| 8 | Connecting arm | 2 | |
| 9 | Oil seal/bearing/collar | 2/1/1 | |
| 10 | Relay arm | 1 |
1. Stand the vehicle on a level surface.
Warning! Securely support the vehicle so that there is no danger of it falling over.
Note: Place the vehicle on a suitable stand so that the rear wheel is elevated.
2. Remove:
- Rear shock absorber assembly lower bolt «1»
- Relay arm-to-swingarm bolt «2»
- Connecting arm-to-relay arm bolt «3»
Note: While removing the rear shock absorber assembly lower bolt, hold the swingarm so that it does not drop down.
3. Remove:
- Rear shock absorber assembly upper bolt «1»
- Rear shock absorber assembly
Note: Raise the swingarm and then remove the rear shock absorber assembly from between the swingarm.
