Warning!
- Never use mineral-based grease (such as lithium or copper based grease) in any area where contact with the braking system hydraulic seals and dust seals is possible. Mineral-based grease will damage the hydraulic seals and dust seals in the calipers and master cylinders.
- Damage caused by contact with mineral-based grease may reduce braking efficiency resulting in loss of motorcycle control and an accident.
1. Install the anti-rattle spring into the caliper.
Warning! Do not apply more than a minimum coating of grease to the caliper sliding pins. Excess grease may contaminate the brake pads, hydraulic seals and discs causing reduced braking efficiency and an accident.
2. Lubricate the sliding pins with silicone based grease (such as T2022021 supplied by Triumph) then reassemble the carrier to the caliper. Ensure the pin gaiters are correctly located on both the carrier and caliper.
Sliding pins