Removing the rear shock absorber (Ducati ST2)

0

Unscrew the two bolts (A and B) and disconnect the monoshock from the swinging arm and the upper rocker arm.



Remove the lower bolt (A) and disconnect the tie rod from the swinging arm. Recover the threaded bush (1) and the bushes (2) at the sides of the tie rod ball joint.



Remove the monoshock expansion reservoir by unscrewing the 2 screws (C) on the frame fixing bracket.

See this article in russian language

Article about repair motorcycles «Ducati ST series ST2» (1997-2003): «Removing the rear shock absorber»: https://motoinstruction.ru/en/Ducati/ST/ST2/chassis/rsusp/112099 <a href="https://motoinstruction.ru/en/Ducati/ST/ST2/chassis/rsusp/112099">Removing the rear shock absorber</a> - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Rear suspension». [url=https://motoinstruction.ru/en/Ducati/ST/ST2/chassis/rsusp/112099]Removing the rear shock absorber[/url] - article about repair motorcycles «Ducati ST series ST2» (1997-2003) from section «Rear suspension».