Installing the rear shock absorber assembly (Yamaha YZF-R1 Y(C))

0

1. Lubricate:

• Collars
• Bearings

Recommended lubricant Molybdenum disulfide grease.

2. Install:

• Rear shock absorber assembly

Install the rear shock absorber assembly lower bolt from the left.

3. Tighten:

• Rear shock absorber assembly bracket nut

Rear shock absorber assembly bracket nut 92 Nm (9.2 mr·kgf, 66 ft·lbf).

• Rear shock absorber assembly lower nut

Rear shock absorber assembly lower nut 40 Nm (4.0 mr·kgf, 29 ft·lbf).

4. Install:

• Connecting arm

When installing the connecting arm, lift up the swingarm.

5. Tighten:

• Connecting arm and swingarm nut

Connecting arm and swingarm nut 40 Nm (4.0 m·kgf, 29 ft·lbf).

See this article in russian language

Article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014): «Installing the rear shock absorber assembly»: https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/chassis/rsusp/115422 <a href="https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/chassis/rsusp/115422">Installing the rear shock absorber assembly</a> - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Rear suspension». [url=https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/chassis/rsusp/115422]Installing the rear shock absorber assembly[/url] - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Rear suspension».