Installing the starter clutch (Yamaha YZF-R1 Y(C))

0

1. Install:

• Starter clutch

Starter clutch holder bolt 14 Nm (1.4 m·kgf, 10 ft·lbf).

• While holding the clutch housing assembly "1" with the sheave holder "2", tighten the starter clutch holder bolt "3".
• Fix the flat surface of the clutch housing assembly with the sheave holder.

Sheave holder 90890-01701.

Primary clutch holder YS-01880-A.

See this article in russian language

Article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014): «Installing the starter clutch»: https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/electric/starter/115462 <a href="https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/electric/starter/115462">Installing the starter clutch</a> - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Starting and charging system». [url=https://motoinstruction.ru/en/Yamaha/R1/YZFR1Y/electric/starter/115462]Installing the starter clutch[/url] - article about repair motorcycles «Yamaha R1 YZF- Y(C)» (2009-2014) from section «Starting and charging system».