- Pickup rotor "1"
- Washer
- Pickup rotor bolt
- When installing the pickup rotor, align the woodruff key "a" with the groove "b" on the pickup rotor.
- Face the "K" mark on the pickup rotor outer side of the vehicle and install.
![](https://motoinstruction.ru/img/yamaha/20/126675.jpg)
2. Tighten:
- Pickup rotor bolt "1"
Pickup rotor bolt 60 Nm (6.0 mrkgf, 43 ft·lbf).
While holding the generator rotor "2" with the sheave holder "3", tighten the pickup rotor bolt.
Sheave holder 90890-01701.
Primary clutch holder YS-01880-A.
![](https://motoinstruction.ru/img/yamaha/20/126676.jpg)
3. Apply:
- Sealant (onto the crankshaft position sensor lead grommet "1")
Yamaha bond No.1215. (Three Bond No.1215®) 90890-85505.
![](https://motoinstruction.ru/img/yamaha/20/126677.jpg)