Notice: Do not hold the radiator inlet hose when removing the engine and moving the engine by itself.
1. Install:
- Engine mounting adjust bolts (temporary tighten)
2. Install:
- Engine
3. Install:
- Engine mounting bolt (rear upper side) "1"
- Engine mounting bolt (rear lower side) "2"
- Engine mounting nut (rear upper side)
- Engine mounting nut (rear lower side)
Lubricate the upper and lower engine mounting bolts threads with lithium-soap-based grease.
4. Install:
- Engine mount collar (front left side) "1" (Install together with damper "2".)
- Engine mounting bolt (front left side) "3" (temporary tighten)
When installing the engine mount collar (front left side), set the damper toward the engine.
5. Install:
- Engine mount collars (front right side) "1"
- Engine mount collar (front right side) "2"
- Engine mounting bolt (front right side) "3" (temporary tighten)
6. Tighten:
- Engine mount adjusting bolts
Engine mount adjusting bolt 7 Nm (0.7 m·kgf, 5.1 ft·lbf).
- Use the pivot shaft wrench "1" and pivot shaft wrench adapter "2" to tighten the engine mounting adjust bolts.
- Make sure that surface of the engine and bearing surfaces of the engine mounting adjust bolts are contacting each other.
Pivot shaft wrench 90890-01471.
Frame spanner socket YM-01471.
Pivot shaft wrench adapter 90890-01476.
7. Tighten:
- Engine mounting nut (rear lower side) "1"
- Engine mounting nut (rear upper side) "2"
Engine mounting nut (rear lower side) 51 Nm (5.1 m·kgf, 37 ft·lbf).
Engine mounting nut (rear upper side) 51 Nm (5.1 m·kgf, 37 ft·lbf).
First tighten the engine mounting nut (rear lower side), and then tighten the engine mounting nut (rear upper side).
8. Tighten:
- Engine mounting bolt (front left side) "1"
Engine mounting bolt (front left side) 70 Nm (7.0 m·kgf, 50 ft·lbf).
9. Tighten:
- Engine mounting bolt (front right side) "1"
Engine mounting bolt (front right side) 70 Nm (7.0 m·kgf, 50 ft·lbf).
