Remove rear wheel.
Remove height adjuster from seat on right.
Remove hydraulic spring-strut adjuster.
Remove rear spring strut.
Install the rear wheel.
Remove the upper securing screw and the bottom bolt of the engine/frame connecting strut (1).
Place auxiliary frame, BMW No. 465630, in position and secure to the rear spring-strut mount (2).
Engage the auxiliary frame to the front anchorage point for the fuel tank (3).
Caution! Use adhesive tape to mask the fuel tank anchorage and protect it against scratches.
Align the auxiliary frame with the flat of the fueltank anchorage, install the threaded bushings (4) at the connecting struts/frame and tighten.
Remove front fasteners for rear frame (5) on left and right.
Install adapter (6) in link/rear-frame anchorage and secure to auxiliary frame.
Remove the fastener securing the front spring strut at the bottom.
Press leading link down at front (arrow), or pull tail section down.
Remove bolt (7) securing the frame to the engine.
Secure the front spring strut at the bottom.
Slightly raise the frame unit at the front and remove the fasteners securing the clutch slave cylinder.
Raise the frame unit at the front.
Caution! When raising the frame unit, take care not to damage the oil line on the engine at the front.
Remove the gearbox, swinging arm, rear axle and rear wheel together.