Locking the engine at TDC (BMW R1150GS)

0

Remove front cover.

Turn the belt pulley to bring the piston to firing TDC.

Firing TDC

1. TDC mark is visible, and

2. The inlet and exhaust valves of the cylinder in question are closed.

Install locking device, BMW # 11 5 640, to lock clutch housing.

Note: The engine can be locked at TDC by inserting locating pin, BMW # 11 2 650, through the hole in the clutch housing and the engine block.

See this article in russian language

Article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004): «Locking the engine at TDC»: https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111613 <a href="https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111613">Locking the engine at TDC</a> - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair». [url=https://motoinstruction.ru/en/BMW/R/R1150GS/engine/repair/111613]Locking the engine at TDC[/url] - article about repair motorcycles «BMW R-series R 1150 GS» (1999-2004) from section «Engine repair».