Disassembly and reassembly of the timing belt pulleys (Ducati Monster 696)

0

To disassemble the pulleys, loosen and remove the three screws (12), slide of the washer and (15) and remove the pulley (16) from the flange (17).

To reassemble, fit the pulley (16) on the hub (17), aligning the timing mark (G) on the pulley with the timing mark on the (H) on the hub.

Fit the washer (15) against the pulley, aligning the timing notch (I) with the timing marks (G) and (H) on the pulley and the hub respectively.

Insert the three screws (12) in the threaded holes (L) of the hub.

See this article in russian language

Article about repair motorcycles «Ducati Monster 696» (2007-2014): «Disassembly and reassembly of the timing belt pulleys»: https://motoinstruction.ru/en/Ducati/Monster/696/engine/repair/114896 <a href="https://motoinstruction.ru/en/Ducati/Monster/696/engine/repair/114896">Disassembly and reassembly of the timing belt pulleys</a> - article about repair motorcycles «Ducati Monster 696» (2007-2014) from section «Engine repair». [url=https://motoinstruction.ru/en/Ducati/Monster/696/engine/repair/114896]Disassembly and reassembly of the timing belt pulleys[/url] - article about repair motorcycles «Ducati Monster 696» (2007-2014) from section «Engine repair».