Hydraulic front brake 1. Pad retaining pin and clip; 2. Screw; 3. Right brake caliper; 4. Sealing washer, thickness 1; 5. Bleed valve; 6. Banjo bolt; 7. Dust cap; 8. Calipers–master cylinder hose; 9. Pair of brake pads; 10. Left brake caliper; 11. Springs; 12. Bracket;...
Removal of the front brake system Operation Section reference Draining the braking circuit Draining the brake circuit Unscrew the banjo bolt (6) securing the brake hose to the master cylinder and recover the sealing washers (4); remove the hose (8) from the master cylinder. Release...
Removal of the brake discs The front brake discs consist of an inner carrier, which is mounted to the wheel, and an outer rotor. Both parts must be changed together as a pair. Remove the front wheel ( Removal of the front wheel ). Unscrew the six screws (14) securing the...
Overhauling the front brake components Caution! Critical safety components. The manufacturer of the brake caliper advises against servicing the internal components of calipers. Incorrect overhaul of this component could endanger rider safety. Operations should be limited to renewal of...
Refitting the front brake system Refitting the brake discs Before refitting the brake disc to the wheel, clean all contact surfaces thoroughly and apply threadlocker to the threads of retaining screws (14). Screw the six retaining screws (14) of front brake disc (13) into the front...
Removal of the rear brake system Caution! The brake master cylinder manufacturer advises against servicing the brake master cylinder due to the safety critical nature of this component. Incorrect overhaul of this component could endanger rider safety. Operations should be limited...
Refitting the rear brake system Relocate the caliper (10) on swingarm pin and on the pin (D). Refit the rear wheel ( Refitting the rear wheel ). If removed, locate the speed sensor (13) on the caliper mounting bracket with the spacer (7) and tighten the screw (12) to the specified...