To replace the fuses, you must first remove the left side cover (see «Side trims - removal and installation»).
1. Open the cover of the fuse box.
2. Using special tongs or tweezers, remove the fuse and replace it.
3. On the cover of the fuse box there are designations of all protected circuits.
1 - starter circuit, ignition circuit, 10 A; 2 - instrument panel illumination circuit, horn circuit, rear position lamp circuit and brake light circuit; 3 - headlight circuit; 4 - cooling fan circuit; 5 - spare fuse, 30 A; 6 - spare fuse, 10 A
4. The main fuse is located next to the conventional fuse box and can be accessed by sliding the rubber boot up the wiring harness.
5. Remove the fuse connector by sliding it up.
6. Use special pliers or tweezers to remove the fuse and replace it.
Burnt fuses can be easily distinguished from serviceable fuses by visual inspection: on the left is serviceable, on the right is a fuse with a blown thread (shown by arrow).
03.07.2024 09:31