Attention! The direction of the headlight beam should be such that the road in front of the motorcycle is well lit, and the drivers of oncoming vehicles are not blinded when the dipped beam is on.
Work is more convenient to do with an assistant (for motorcycle loading). You will need a screen, 2x1 m in size, or just a flat vertical surface, on which you will need to apply the appropriate markings.
I. We install a fully equipped and refueled motorcycle five meters in front of the screen and turn on the headlight. The assistant gets on the motorcycle.
2. The light spot should be located on the screen, as shown in the diagram.
![](https://motoinstruction.ru/img/honda/1/110727.jpg)
Screen layout for headlight adjustment: C - a horizontal line corresponding to the center of the headlight; D - line passing through the centers of light spots; O - vertical line corresponding to the center of the headlight; h - distance from the center of the headlight to the ground
To adjust the light beam, loosen the headlight mounting bolts and adjust its position in the vertical plane.
![](https://motoinstruction.ru/img/honda/1/110728.jpg)
After adjusting the light beam, tighten the headlight mounting bolts.
To adjust the light beam in the horizontal plane, turn the adjusting screw, as shown in the photo.
![](https://motoinstruction.ru/img/honda/1/110729.jpg)