30 A Main Fuse Removal
Remove:
- Right Rear Frame Cover (See Rear Frame Cover Removal in the Frame chapter)
- Bolt [A]
- Cover [B]
![](https://motoinstruction.ru/img/kawasaki/23/129283.jpg)
- Disconnect the connector [A].
![](https://motoinstruction.ru/img/kawasaki/23/129284.jpg)
- Pull out the main fuse [A] from the starter relay with needle nose pliers.
![](https://motoinstruction.ru/img/kawasaki/23/129285.jpg)
Fuse Box Fuse Removal
- Remove the seat (See Seat Removal in the Frame chapter).
- Unlock the hook [A] to lift up the lid [B].
![](https://motoinstruction.ru/img/kawasaki/23/129286.jpg)
- Pull the fuses [A] straight out of the fuse box with needle nose pliers.
![](https://motoinstruction.ru/img/kawasaki/23/129287.jpg)
15 A ECU Fuse Removal
Remove:
- Seat (See Seat Removal in the Frame chapter)
- Unlock the hook [A] to pull the lid [B].
![](https://motoinstruction.ru/img/kawasaki/23/129288.jpg)
- Pull out the ECU fuse [A] from the fuse box.
![](https://motoinstruction.ru/img/kawasaki/23/129289.jpg)
Fuse Installation
- If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper amperage.
- Install the fuse box fuses on the original position as specified on the lid.
Fuse Inspection
- Remove the fuse (see 30 A Main/Fuse Box /15 A ECU Fuse Removal).
- Inspect the fuse element.
If it is blown out, replace the fuse. Before replacing a blown fuse, always check the amperage in the affected circuit. If the amperage is equal to or greater than the fuse rating, check the wiring and related components for a short circuit.
- Housing [A]
- Fuse Element [B]
- Terminals [C]
- Blown Element [D]
![](https://motoinstruction.ru/img/kawasaki/23/129290.jpg)
Caution: When replacing a fuse, be sure the new fuse matches the specified fuse rating for that circuit. Installation of a fuse with a higher rating may cause damage to wiring and components.