Removing
The seat must be removed to remove the side panels (see «Seat - removal and installation»).
1. With a 5 mm hex wrench, unscrew the two screws securing the lining.
2. Remove the lining, pulling its lower part towards you and down.
![](https://motoinstruction.ru/img/honda/1/110533.jpg)
Attention! It is important not to confuse the cladding screws in places. A shorter screw is screwed in from above, a long one from below.
Installation
Install the cover in reverse order.
The removal and installation procedure is identical for the facings on both sides.