The sound signal is located under the headlight and consists of two signals of different tonality.
I. Disconnect the four terminals of the wires going to the signals.
2. Using a 10 mm wrench, unscrew the nut of the signal brackets.
3. Shoot signals.
Adjusting the tone of the sound is done by turning the adjusting screw on the back of the sound signal. The sound should be loud and clear, without any extraneous noise. The second sound signal is adjusted in the same way.
You can check the sound signal by connecting it directly with wires to a charged battery. If there is no sound, the defective signal must be replaced.
We install the sound signal in the reverse order.