| POSITION | SPECIFICATIONS | |
| E-03, 28 | E-33 | |
| Carburetor model | MIKUNI TM28 | MIKUNI BSR 32 |
| Diffuser diameter | 28 mm | 32 mm |
| An identification number | 13E3 | 13E4 |
| Idle speed, rpm | 1600±100 rpm | 1500±100 rpm |
| Fuel level in the float chamber | 14.2±1.0 mm | 13.0±1.0 mm |
| Main fuel jet | №127,5 | №132,5 |
| Main air jet | 1.2 mm | — |
| Needle | 6FN3-3rd | 5DH46 |
| Fuel jet | P-6M | P-OM |
| Idle fuel jet | №37,5 | №12,5 |
| Screw quality | Factory setting (1¼ turns back from stop) | Factory setting (2¾ turns back from stop) |
| Free movement of the throttle (pull rope) | 2.0-4.0 mm | — |
Suzuki:
Carburetor Specifications (Suzuki DR-Z 250)
See this article in russian language
Carburetor design (E-33)
Carburetor design (E-03, E-28)
Checking the fuel line
Removing the fuel tap and filter
Removing the gas tank
Carburetor design (E-03, E-28)
Checking the fuel line
Removing the fuel tap and filter
Removing the gas tank
Identification number location
Removing the carburetor
Disassembling the carburetor (E-03, E-28)
Cleaning the carburetor (E-03, E-28)
Carburetor check (E-03, E-28)
Carburetor assembly and installation (E-03, E-28)
Disassembling the carburetor (E-33)
Cleaning the carburetor (E-33)
Carburetor check (E-33)
Carburetor assembly and installation (E-33)
Removing the carburetor
Disassembling the carburetor (E-03, E-28)
Cleaning the carburetor (E-03, E-28)
Carburetor check (E-03, E-28)
Carburetor assembly and installation (E-03, E-28)
Disassembling the carburetor (E-33)
Cleaning the carburetor (E-33)
Carburetor check (E-33)
Carburetor assembly and installation (E-33)
Similar articles about motorcycles of other brands
Aprilia RS 125/3 (1998-2005): Carburetor specifications
Triumph Street Triple 765 (2017-2024): Specifications of motorcycle
Yamaha FZ1 Fazer (2006-2015): Specifications
Kawasaki ZX6R/ZX600J (2000-2002): General specifications
Harley-Davidson V-Rod (2002-2006): Frame and chassis specifications
BMW R 1150 GS (1999-2004): Engine repair specifications
Ducati Monster 696 (2007-2014): Product specifications
Honda CB 400 SF (1992-1999): Carburetor bar — removal and installation
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
- Information for owner
- Introduction to manual
- Technical characteristics
- Maintenance
- Troubleshooting
- Engine and systems
- Engine repair
- Fuel system
- Transmission
- Running gear and frame
- Frame and hinged elements
- Wheels and tires
- Brake system
- Front suspension and handlebar
- Rear suspension
- Electric equipment
- Equipment and devices
- Starting and charging system