Remove the throttle cable mounting bracket (4).
Remove the top carburetor cover (5).
Remove the damper lever shaft (6).
Remove the damper mechanism (1) and gasket (2).
Remove the drive lever and damper.
Remove the float chamber cover (3).
Remove the accelerator pump piston (4), spring (5) and rod (6).
Remove the floats (7) after removing the float axis (8).
Note. Remove the floats along with the needle valve.
Attention! When removing the float shaft, be careful not to damage the carburetor body.
Remove the needle valve (1).
Remove the main fuel jet (2) and base (3).
Remove the fuel jet (4) from the diffuser side.
Remove the idle fuel jet (5), quality screw (6) and needle valve seat (7).
Remove the main air jet (8) and air jet of the idle system (9).
Remove the damper stop screw (1) and a spring (2).
Remove the choke button.
Attention! Do not remove the 4 screws on the carburetor body.