| Order | Job name/Part name | Quantity | Remarks |
| Removing the rear brake pads | Remove the parts in the order listed. | ||
| Muffler | Refer to "Rear wheel and brake disc". | ||
| Muffler stay | |||
| 1 | Brake hose holder | 1 | Refer to "Replacing the rear brake pads". |
| 2 | Caliper | 1 | |
| 3 | Cover | 1 | |
| 4 | Clips | 2 | |
| 5 | Pad pins | 2 | |
| 7 | Pad spring | 1 | |
| 6 | Brake pads | 2 |
For installation, reverse the removal procedure.
Caution! Disc brake components rarely require disassembly. Therefore, always follow these preventive measures:
- Never disassemble brake components unless absolutely necessary.
- If any connection on the hydraulic brake system is disconnected, the entire brake system must be disassembled, drained, cleaned, properly filled, and bled after reassembly.
- Never use solvents on internal brake components.
- Use only clean or new brake fluid for cleaning brake components.
- Brake fluid may damage painted surfaces and plastic parts. Therefore, always clean up any spilt fluid immediately.
- Avoid brake fluid coming into contact with the eyes as it can cause serious injury.
- First aid for brake fluid entering the eyes: Flush with water for 15 minutes and get immediate medical attention.