![](https://motoinstruction.ru/img/yamaha/16/122459.jpg)
Order | Job name/Part name | Quantity | Remarks |
Removing the rear wheel | Remove the parts in the order listed. | ||
Warning! Securely support the motorcycle so there is no danger of it falling over. | |||
Final gear oil | Drain Refer to "Final gear oil replacement". | ||
Fuel tank and seats | Refer to "Fuel tank and seats". | ||
Rear fender assembly | Loosen | ||
1 | Brake caliper bracket bolt | 1 | |
2 | Bolts | 4 | |
3 | Rear axle nut/washer | 1/1 | Refer to "Removing/installing the rear wheel". |
4 | Rear axle end nuts/axle holder | 2/1 | |
5 | Rear wheel assembly | 1 | |
6 | Washer | 1 | |
7 | Collar | 1 |
For installation, reverse the removal procedure.
1. Stand the motorcycle on a level surface.
Warning! Securely support the motorcycle so that there is no danger of it falling over.
Note: Place the motorcycle on a suitable stand so that the rear wheel is elevated.
2. Remove: rear gear case fitting bolts
3. Remove:
- brake caliper (1)
- brake caliper bracket bolt
Note: Do not depress the brake pedal when removing the brake caliper.
![](https://motoinstruction.ru/img/yamaha/16/122461.jpg)
4. Remove:
- wheel axle nut washer
- rear axle end nut (2)
- rear axle holder (3)
- rear wheel