1. Lubricate:
- wheel axle
- oil seallips
Recommended lubricant: Lithium soap base grease
2. Install: front wheel assembly
Note: The arrow mark (a) on the tire must point in the direction of the wheel.
3. Tighten:
- wheel axle (1): 59 Nm (5.9 m·kg)
- wheel axle pinch bolt (2): 20 Nm (2.0 m·kg)
Caution! Before tightening the wheel axle nut, push down hard on the handlebar several times and check if the front fork rebounds smoothly.
4. Install: brake caliper: 40 Nm (4.0 m·kg)
Warning! Make sure that the brake hose is routed properly.